POST
|
I'm trying to split polygons into ones with a width of 0.1 miles so that a data point is in the center of the polygon. The center data points (in pink) are 0.1 miles apart from each other. To do this, I created a center line and then generated points along that line every 0.05 miles (yellow points). These are my markers to know where to split the polygon for the segments to be 0.1 miles wide. I tried using Divide (I'm in ArcGIS Pro), which lets you split a polygon by area, proportion and width. In the image below it shows that it works fine if the polygon forms a straight edge similar to what would you see as roads. I'm dealing with river channels that have irregular shapes, so I have to constantly fix the angle of the split. At this point, my technique of splitting the polygon manually by using the yellow point as an anchor is faster than going through the divide menu every time I have fix the angle of the line. The area is way larger than what the figure shows, so it is taking me too long! Anybody know of a magical python code to batch split the polygon, or a way to generate lines on the yellow points? At this point I could use the split along line tool. All suggestions are welcome! -Jen
... View more
02-03-2020
11:03 PM
|
0
|
1
|
622
|
POST
|
I'm using the Spatial Analyst Contour tool for converting raster outputs to vector. These raster outputs are the result of Spline with Barriers interpolation tool and their values vary significantly. I'm wondering if there's a script I can add to the contour tool so it identifies the range of values in a raster file and then selects the contour interval according to the amount of classes I want. For example, if I have values from 0-140 and I want ten classes/intervals then 140/10 = 14 contour intervals. I'm currently doing this manually, but is not time efficient. Applying graduated colors as primary symbology does not change or generate new contours and I need these changes to be preserved to be used in a Story Map. Any suggestions are highly appreciated!
... View more
08-21-2019
11:42 AM
|
0
|
1
|
236
|
POST
|
Here are the images requested: I have not applied a mask.
... View more
06-24-2019
10:34 AM
|
0
|
0
|
1612
|
POST
|
Hi Steve, I actually tried the simplify tool with your settings, but the processing time is still pretty slow (~10 - 20 minutes). The polygon I'm using has very complicated geometry and I don't think I could get it fast enough for it to be efficient in my workflow. I have decided to stay with Spline with Barriers and using Focal Statistics along with the Contour tool to produce a smooth vector file. The problem I'm encountering now is a weird "halo" effect along the edge of the polygon, like a gradient in some cases. I wonder if is an artifact of Spline with Barriers.
... View more
06-21-2019
01:14 PM
|
0
|
2
|
1612
|
POST
|
Hi Steve, I apologize for the late response. Thanks for the reminding me about Kernel with barriers, I have also tried Diffusion with barriers. The problem with these methods is the processing time. When the default properties are left unchanged, the surface does not cover the entire area (image attached). To fix this, I increase the bandwidth but then the wizard takes over 20 minutes to finish, most times even more.
... View more
06-03-2019
11:40 AM
|
0
|
4
|
1612
|
POST
|
Hi, I'm Jeniffer Soto from the Biogeochemistry group at USGS. We want to create a prediction surface for different water quality parameters along the Sacramento-San Joaquin Delta. Predictions are currently being completed using Kriging/Cokriging (we determine which is the best method using the summary report), and Spline with barriers. These prediction results will be extracted using the "Extract values to points" tool from the raster output to make temporal comparisons. We are also interested in generating a vector file for presentation purposes. Our primary concern at the moment is which interpolation method is best suitable for our needs. For example, Kriging works best for showcasing purposes since we have the option of export as a vector, but some of the surface predictions are not accurate because it interpolates across the entire surface. On the other hand, we can set boundaries using Spline with barriers, so the interpolation occurs only within the river channels. The problem with this method is that the output is only a raster file. I can easily convert the prediction layer to vector, but the image will still be pixelated when you zoom in (this maps will eventually end up in a story map). I need a vector file so I can clip it to my delta polygon. Also, the Spline with barriers tool does not allow for much flexibility like the searching neighborhood, applying transformations to the data, and it does not give you a cross-validation summary report when the interpolation is complete. Again, I can calculate this myself, but it becomes too time consuming because we are generating over 100 maps. If we want more information regarding background processes and algorithms applied for this interpolation methods, should I open an Esri case? We are interested in the possibility of setting barriers with Kriging or scripting Spline with barriers, so it produces a vector layer instead of having to convert from raster to polygon. We are not familiar with software engineering processes for Esri products, so we would like to have an understanding of what's possible with these tools. Let me know if you need additional information or have any suggestions.
... View more
05-23-2019
09:47 AM
|
0
|
6
|
2091
|
POST
|
Where do you work and what is your role? Hello! My name is Jeniffer Soto from Sacramento, CA. I'm currently working for the California Water Science Center at the USGS. My role is to analyze, map, and generate prediction surfaces for water quality data along the Sacramento-San Joaquin Delta in collaboration with the Biogeochemistry group. What GIS success have you had this year and what product did you use? (big or small - no win is out of bounds) I took my first and only GIS class during the Spring of 2018, which was my last semester as an undergraduate, and I'm already working and using those skills. We successfully worked on a methodology that allows us to compare interpolation methods of high-frequency mapping data between three months to produce difference maps with the same spatial reference. I was able to do this in ArcMap, and I have gained more experience in ArcGIS Pro. I have a Bachelor of Science in Geology, but I'm starting to consider a Masters as a Geospatial Analyst because I enjoy it so much. What is your expertise (GIS related or not), and how can that help the community? My side hustle is Photography and Studio Art, so I have knowledge in design and the Adobe suite of programs. I'm interested in making visually appealing maps that are scientifically sound. (I'm sure that's what we all want, don't hesitate to ask me about information design). I have a long way to go in the GIS world, so I'm here to absorb some of the great knowledge people are willing to share. Bonus Round! Post the coordinates to your favorite place on earth. 48.8566° N, 2.3522° E - I'm hoping to one day move to France. I still need to work on my French.
... View more
05-23-2019
09:09 AM
|
1
|
1
|
706
|
Title | Kudos | Posted |
---|---|---|
1 | 05-23-2019 09:09 AM |
Online Status |
Offline
|
Date Last Visited |
11-11-2020
02:23 AM
|