Latest Contributions by JuanSantos

‎03-11-2020

Hi Armando Freites‌ Here is the Bug link, and the improvements in ArcGIS Pro 2.5. I hope this information will be useful to you. Greetings.-

‎01-17-2020

Hi Armando Freites‌ I leave the steps, Go to control panel Programs_ Programs and features You choose: "Microsoft Access database engine 2016" uninstall If you need to download the 32-bit one: Technical article submitted: Work with Microsoft Excel files in ArcGIS Pro < https://pro.arcgis.com/es/pro-app/help/data/excel/work-with-excel-in-arcgis-pro.htm > Click on "Download Center" and it will take you to the following window: (attached image) Note: it will automatically download "AccessDatabaseEngine", but it is better to do it manually to ensure. You must click on " click here to download manually " and download the 1st File "AccessDatabaseEngine" (attached image) Run as administrator It is recommended to restart the computer Open ArcGIS Pro, add the table and you should not see the error. I hope it works for you.

Re: Profile elevation tool · ‎12-11-2019

Hi!!! What you can do is run the float to int. That is in: • 3d tools analyst • Mathematical raster Int.

‎12-09-2019

Hi Scott Louque ‌ In "Contour", click in "Environment Settings" "XY Resolution and Tolerance" or "Z Values" "Z Resolution" _ "Feet" Hope this can help you

‎12-09-2019

Hi M Taft-Ferguson It depends on the version you have of the app, for example, I leave you some updates: Update of 09/26/2019: Fixed an error that caused the geopoint calculations that use values in a main layer not to be applied after the first repetition. In the update 01/31/2019 connect 3.2.196: Various corrections of location and internationalization errors and improvements have been made. Update of 11/21/2017 version 2.5.44. when using a Bluetooth R1 Trimble GNSS receiver The link: Novedades de Survey 123 Other link: What's new in Survey123 Hope this can help you.

‎12-09-2019

Hi @Juma Khudonazarov It depends on the version you have of the app, for example, I leave you some updates: Update of 09/26/2019: Fixed an error that caused the geopoint calculations that use values in a main layer not to be applied after the first repetition. In the update 01/31/2019 connect 3.2.196: Various corrections of location and internationalization errors and improvements have been made. Update of 11/21/2017 version 2.5.44. when using a Bluetooth R1 Trimble GNSS receiver The link: Novedades de Survey 123 Other link: What's new in Survey123 Hope this can help you.

‎12-09-2019

Hi @Fransisco Redi Follow this link Installing ArcGIS Desktop on your computer Hope this can help you.

‎12-05-2019

Hi Catie Fitzgerald. I recommend the technical article: Relating the attributes in one table to another—Help | ArcGIS Desktop. I hope it helps

‎12-02-2019

Hi Kal Ssin ‌ Maybe the data have a problem. Im recomended use the tool geometry repare. I hope it helps

‎11-29-2019

Hi Anu Sawant I leave you the following link: Also in the same tool you used you can go to "Environment Settings" _ Processing Extent and select the extension you want. Hope this can help you. I leave you a capture.

‎11-29-2019

Hi Slobodan Komatina‌ I suggest the following for the polygons: You can create a Tin again, add the polygon layer and add the shape containing the contours, in this shape, specify the column containing the elevations. After that configure the views of the polygons. I leave you the captures as an example:

‎11-29-2019

Hi S V I recommend the following: Instead of using cubic resampling, according to the technical article, it is better to use the bilinear since when using the cubic, "calculate the value of each pixel by adjusting to a smoother curve based on the surrounding 16 pixels. Smoother but can create values outside the range found in the source data ". Technical article link: Resampling

‎11-27-2019

Hi! Jason Dravet My suggestion is: Right click on the image Save as a layer file… And save the colors you chose as a legend, then you can open the file where you want and define the ramp of defined colors. Other form: Working with color ramps I hope it helps.-

‎11-27-2019

Hi Catie Fitzgerald As a tip, to the current layer of polygons, in its attribute table, you can add a selected column "cod_post", for example, and then activate the labels according to the definition you want. You can also in an excel table where you already have all the codes loaded, add a specified "ID" field and write the number as appropriate to the ID of the polygons that you already have drawn in a layer, all this so that you can then join both tables (excel table and attributive table) and the codes are related to each polygon. Finally you can export this layer and save it with another name to keep the area code column. It all depends on the final product you want. I hope I have explained

‎11-27-2019

Hi Kal Ssin You can applied topology, and the rules can it "Must not Overlap" and "Must Not Self- Overlap". I hope it hepls.-

Online Status	Offline
Date Last Visited	‎03-08-2023 10:19 PM

My Ideas

Latest Contributions by JuanSantos

Re: ARCGIS PRO ATTACHMENTS

Re: arccgis pro and excel

Re: Profile elevation tool

Re: How to display elevation contours in feet

Re: Option to suppress "position source closed error" in Survey123 app

Re: Location error

Re: tutorial installtation arcgis dekstop personal use????

Re: What is the best way to upload zip code polygons?

Re: scale range

Re: Clip to shape in ArcGIS Online

Re: Create terrain effect over shapefile polygon in ArcMap 10.4

Re: Sentinel2 - Cubic resampling - ArcMap vs. QGIS

Re: assigning a color to a value using a color ramp

Re: What is the best way to upload zip code polygons?

Re: I'd like to make sure the roads don't overlap.

Re: Clip to shape in ArcGIS Online

Re: How do I construct a polygon based on this typ...

Re: arccgis pro and excel

Re: I'd like to make sure the roads don't overlap.

Re: How do I construct a polygon based on this typ...