Latest Contributions by JonDicken

‎03-23-2017

Hi, This thread appears to have gone very quiet. Is this forum still actively being monitored by ESRI staff? Regards, Jon

‎03-14-2017

Hi Mike, This issue is still preventing us from moving to 10.2.7. Is there a route for raising this as a bug/fix request? Regards, Jon

‎03-02-2017

Hi Mike, Any news on this? Was the example provided sufficient? Or do you need further information?

‎02-15-2017

Hi Mike, We are moving layers as below, with the indexes appearing valid at runtime. For Each Layer As Layer In newOrder Dim newIndex As Integer = newOrder.IndexOf(Layer) Dim existingIndex As Integer = SpatialMap.Layers.IndexOf(Layer) If newIndex <> existingIndex Then SpatialMap.Layers.Move(existingIndex, newIndex) End If Next ‍‍‍‍‍‍‍‍‍‍ Regards, Jon

‎02-06-2017

Hi Mike, It's awkward to provide a sample which reproduces this due to the size and nature of the application in which we are experiencing the exception. Is this an issue which you will be looking in to further as part of your support for 10.2.7? We are understandably reluctant to move our code over to v100 at this point in time. Regards, Jon

‎12-14-2016

Hi Mike, We are running 10.2.7 as stated above. "since moving to the latest version of the runtime (10.2.7)." We have been using the runtime since it was in beta and been through each version without having this issue. So it certainly appears to have been introduced in 10.2.7. Regards, Jon

‎12-12-2016

Hi, We are also seeing this issue occur frequently since moving to the latest version of the runtime (10.2.7). With previous versions this was not an issue. Our code hasn't changed, but we now get an awful lot of these which cause our application to crash. Is a fix for this being investigated? Argument out of range exception should not be difficult to put some preventative code around at the very least.

‎09-05-2016

Hi, We are wondering if there is any support for Schematics whilst using the ArcGIS .NET Runtime? I have managed to find some Javascript based examples, but I am yet to see any .NET examples (which aren't ArcObjects related). Is there a way to consume a schematic service via the .NET runtime library? Regards, Jon

‎10-02-2015

Okay, thanks. That's a bit of a shame. I can see that would work nicely for smaller layers but with much larger Feature Layers it doesn't sound great as you would end up with a huge graphics layer, which is not recommended/really an option. The beauty of the Feature Layer is that it doesn't load all of the features in to memory at the same time. Perhaps the real request is therefore not to alter the Feature Layers schema (by joining) but just have the renderer use a 'lookup' in order to get its values. That way you could just point a Feature Layer at a separate list of <Feature ID, Value>s and have the renderer take the value for each Feature from there.

‎08-10-2015

This is still something that we are very keen to have made available. Any news?

‎07-31-2015

Hi, Is it possible to join a Feature Layer to an in memory table or graphics layer in code and use the attributes from the resulting join for thematically styling the Feature Layer using a class break renderer for example? This would allow a user to bring their own local data in and have it used to style an existing Feature Layer using new attributes. So the steps would be: - Existing Feature Layer - User selects a local database file and imports the data in to a new table or layer - Join the new table or layer to the existing Feature Layer - Create renderer for the Feature Layer based on attributes from the new table or layer Regards,

‎02-25-2015

Hi, we are also seeing Access Violation Exceptions occurring in our application, and unfortunately they are crashing the entire application. We saw this in 10.2.4 and have also seen the same issue since moving to 10.2.5. The issue seems to occur most frequently when adding/updating labels on larger feature layers - so we presume this is in some way related. Looking at the crash dumps from our application we can see it is coming from the RuntimeCoreNETDesktop dll. Analyzing the exception using WinDBG gives us the following info & stack trace: FAULTING_IP: RuntimeCoreNETDesktop!AGRS_ValidateLicenseInfo+22c1a4 112b9d14 8b5e04 mov ebx,dword ptr [esi+4] EXCEPTION_RECORD: ffffffff -- (.exr 0xffffffffffffffff) ExceptionAddress: 112b9d14 (RuntimeCoreNETDesktop!AGRS_ValidateLicenseInfo+0x0022c1a4) ExceptionCode: c0000005 (Access violation) ExceptionFlags: 00000000 NumberParameters: 2 Parameter[0]: 00000000 Parameter[1]: 0000000c Attempt to read from address 0000000c STACK_TEXT: WARNING: Stack unwind information not available. Following frames may be wrong. 19dcf988 112b7be5 2b291290 2409c454 2b291220 RuntimeCoreNETDesktop!AGRS_ValidateLicenseInfo+0x22c1a4 19dcf9e0 112b9c5f 00000046 2b291290 00000046 RuntimeCoreNETDesktop!AGRS_ValidateLicenseInfo+0x22a075 19dcf9f4 11797197 00000046 2b291290 2b827848 RuntimeCoreNETDesktop!AGRS_ValidateLicenseInfo+0x22c0ef 19dcfa30 11795def 1a4bf9b0 01291220 1a45f840 RuntimeCoreNETDesktop!AGRS_ValidateLicenseInfo+0x709627 19dcfa5c 11796b5c 2409c7a4 1a1eabe4 10a47bc0 RuntimeCoreNETDesktop!AGRS_ValidateLicenseInfo+0x70827f 19dcfc34 11798eb5 2409c18c 1a1ab0a8 19dcfc64 RuntimeCoreNETDesktop!AGRS_ValidateLicenseInfo+0x708fec 19dcfc70 11238a52 112bc2a7 2409c14c 1a1ab0a8 RuntimeCoreNETDesktop!AGRS_ValidateLicenseInfo+0x70b345 19dcfcbc 112bbd50 34209c00 2409c134 00000000 RuntimeCoreNETDesktop!AGRS_ValidateLicenseInfo+0x1aaee2 19dcfcf8 110955f7 2409c0d8 1a1f6b54 19dcfd30 RuntimeCoreNETDesktop!AGRS_ValidateLicenseInfo+0x22e1e0 19dcfd14 11810a8a 1a1ab0a8 2409c0f0 1a2a3f90 RuntimeCoreNETDesktop!AGRS_ValidateLicenseInfo+0x7a87 19dcfd3c 11810a37 1a2a3f90 1a1ce370 19dcfd5c RuntimeCoreNETDesktop!AGRS_ValidateLicenseInfo+0x782f1a 19dcfd4c 1159738e 1a2a3f90 1a3a64a8 19dcfdd0 RuntimeCoreNETDesktop!AGRS_ValidateLicenseInfo+0x782ec7 19dcfd5c 77919512 1a1ce370 4668941a 005611c8 RuntimeCoreNETDesktop!AGRS_ValidateLicenseInfo+0x50981e 19dcfdd0 77904429 1a1ce370 1a3a64a8 466896fa ntdll!RtlpTpWorkCallback+0x11d 19dcff30 7584338a 005611c0 19dcff7c 778e9f72 ntdll!TppWorkerThread+0x572 19dcff3c 778e9f72 005611c0 466896b6 00000000 kernel32!BaseThreadInitThunk+0xe 19dcff7c 778e9f45 77903e85 005611c0 00000000 ntdll!__RtlUserThreadStart+0x70 19dcff94 00000000 77903e85 005611c0 00000000 ntdll!_RtlUserThreadStart+0x1b SYMBOL_STACK_INDEX: 0 SYMBOL_NAME: runtimecorenetdesktop!AGRS_ValidateLicenseInfo+22c1a4 FOLLOWUP_NAME: MachineOwner MODULE_NAME: RuntimeCoreNETDesktop IMAGE_NAME: RuntimeCoreNETDesktop.dll DEBUG_FLR_IMAGE_TIMESTAMP: 54bef6ac STACK_COMMAND: dt ntdll!LdrpLastDllInitializer BaseDllName ; dt ntdll!LdrpFailureData ; ~24s; .ecxr ; kb FAILURE_BUCKET_ID: NULL_CLASS_PTR_DEREFERENCE_c0000005_RuntimeCoreNETDesktop.dll!AGRS_ValidateLicenseInfo The nature of the crash is obviously catastrophic for the rest of our application, and far from ideal. Thanks, Jon

‎11-04-2014

Hi, We use a number of Spatial Queries in our code using a Spatial Query Filter against a Feature Layer (FeatureServiceTable.QueryAsync). Running a 'Within' query in our application gives different results to running it in ArcMap. So in Arcmap we would get 33 Features (correctly) returned from 'Within' a selected polygon. When performing this query in code we get 39 features returned from the Feature Layer. 6 features difference. Interestingly if straight after getting those 39 features back querying our Feature Layer we loop through them and perform the same Within operation using the local 'GeometryEngine.Within' function it will only find 33 of them to be valid - as we would have expected in the first place. Sample code snippet below: Dim qf As New SpatialQueryFilter() With {.WhereClause = Nothing, .SpatialRelationship = SpatialRelationship.Within, .Geometry = QueryGeometry} Dim results As IEnumerable(Of Esri.ArcGISRuntime.Data.Feature) = Await .FeatureServiceTable.QueryAsync(qf) For Each feature As Esri.ArcGISRuntime.Data.Feature In results Dim validatedCount As Integer = 0 If GeometryEngine.Within(feature.Geometry, QueryGeometry) Then validatedCount += 1 End If Next 39 features after querying the Feature Layer. 33 validated using the GeometryEngine against the results. Am I doing something obviously wrong here? I assumed the SpatialRelationship.Within would return the same results? Thanks, Jon

‎10-28-2014

Yep, running out of something. We allow our clients to configure the number of layers & maps so this is something that will be different on a per client basis. Do you have any clear recommendations for number of layers, features etc... anywhere? Or what would you personally consider to be a reasonable amount? Regards, Jon

‎10-27-2014

Hi, We are seeing a problem in our application which is caused by calls to Symbol.CreateSwatchAsync. The exception we are getting is a COMException (0x88980003) which is thrown while we create the images for our legend controls. This doesn't happen with a single map window being opened. But if we start to open more maps at the same time then it starts to appear. We have a large number of layers being loaded in each map (~50) and some of the layers can have large numbers of symbols (unique value renderers etc...). We loop through the layer infos and create the swatches we need to display in our application. It could suggest that something is therefore not being released correctly by the API? I have attached the full stack trace for you, and it's also worth mentioning that our 'googling' bought up this very similar issue raised earlier in the year - https://community.esri.com/thread/95101. Thanks, Jon

Online Status	Offline
Date Last Visited	‎11-11-2020 02:24 AM

My Ideas

Latest Contributions by JonDicken

Re: ArgumentOutOfRangeException when reordering layers while other layers are loading

Re: ArgumentOutOfRangeException when reordering layers while other layers are loading

Re: ArgumentOutOfRangeException when reordering layers while other layers are loading

Re: ArgumentOutOfRangeException when reordering layers while other layers are loading

Re: ArgumentOutOfRangeException when reordering layers while other layers are loading

Re: ArgumentOutOfRangeException when reordering layers while other layers are loading

Re: ArgumentOutOfRangeException when reordering layers while other layers are loading

Schematic Service support?

Re: Feature Layer - Class Break Renderer - Join To Table

Re: Map Rendering Complete Event

Feature Layer - Class Break Renderer - Join To Table

Re: Random AccessViolationException

Spatial Query - Geometry Engine Differences

Re: CreateSwatchAsync - COMException (0x88980003)

CreateSwatchAsync - COMException (0x88980003)

Re: Feature Layer - Class Break Renderer - Join To...

Map Rendering Complete Event