POST
|
Try these: Hydrologic and Hydraulic Analyses Using ArcGIS https://www.esri.com/training/catalog/57630437851d31e02a43f239/hydrologic-and-hydraulic-analyses-using-arcgis/ Arc Hydro: GIS for Water Resources https://www.esri.com/training/catalog/57630436851d31e02a43f0c4/arc-hydro:-gis-for-water-resources/ I plan on upgrading to 10.5 in a couple of months and a good friend from Esri sent this to me. I have not tried them yet.
... View more
04-21-2017
11:55 AM
|
0
|
0
|
7857
|
POST
|
Hi Robert, I saw the answer you gave to Ben about there not being a GeoRss widget for WAB and you mentioned to him to try the Add Data Widget because it accepts GeoRss URL's. I was looking for either the GeoRss or a similar widget that works a lot like the GeoRss widget for Flex did. That one allowed a person to add in a .XML file. I used it to connect to Transguide cameras in the State of Texas. I created a .XML file with all of the camera X & Y locations as well as their web addresses. It would then pop up a separate window and open up the camera's URL to a live view. Would you happen to know how I could access the State's site directly through WAB? Here is the TxDOT link. This link is to the States camera system. There is a map tab and a camera tab. Thanks Robert, any help would be appreciated.
... View more
01-18-2017
12:21 PM
|
0
|
1
|
444
|
POST
|
Hi Robert, great job with all of your widgets! I have used pretty much all of them when I was using the Flex builder. I am currently switching over to the WebApp builder and I am installing and configuring a lot of your new widgets. My question is: I have a manhole spatial layer that is related to a measure down non-spatial table. In Flex, it automatically showed the related table once you identified a manhole. For some reason I can't get it to do the same thru the WebApp builder. I tried using your Identify widget and your enhanced search widget but neither shows the related table. Am I missing something? Also, any thought on getting the GEORSS widget for traffic cameras working in the WebApp builder? Thanks, Mike
... View more
01-06-2016
01:29 PM
|
0
|
1
|
553
|
POST
|
What would the syntax be to have it automatically field calculate a field in desktop? Maybe if I can have that syntax already placed in the empty field once a point is dropped the automatic field calculation will just happen.
... View more
10-26-2015
11:57 AM
|
0
|
3
|
3594
|
POST
|
Tim, thanks for the quick reply. Unfortunately, a domain will not work because when the user drops in a point I want a new empty field to field calculate the name of that point (which will be unique) along with the data from another field. So once the point gets dropped the data from the other field will be combined with the name of the point that was just dropped and that will always be unique to every point.
... View more
10-26-2015
11:45 AM
|
0
|
5
|
3594
|
POST
|
Ben, I am facing the same problem you are facing. Were you able to find a solution to this problem? I am having users drop a point on a map and I would like for it to auto field calculate text into a new field.
... View more
10-26-2015
11:28 AM
|
0
|
7
|
3594
|
POST
|
Thanks Michael, I wish I could wait but I specifically asked for an enhancement to the data extract widget and they added it in to the 3.5 version. The only thing is I cannot upgrade to 3.5 if it refuses to see the applications I built and had upgraded from 3.4. Not sure what to do next. I might have to call them and put in a trouble ticket. In order to do that I would have to re-install 3.5 and show them it does not work causing my 3.4 applications to not be editable. Mike
... View more
10-02-2013
08:04 AM
|
0
|
0
|
209
|
POST
|
I upgraded my Flex Application Builder from 3.4 to 3.5. I had created several websites with the 3.4 builder and for some reason I cannot see the website once I upgraded them to 3.5. Here is what I did: 1) I installed Flex Buider 3.5 2) Open up the application builder made a copy of my existing applications and then upgraded my applications from 3.4 to 3.5. 3) I can edit the application and even the widgets with the 3.5 application builder but it will not show me a preview or even open up the URL. It appears that the 3.5 builder does not recognize the C:\Inetpub\wwwroot\Flexviewers folder that is automatically created by the application builder. If I create an entirely new application in 3.5 it will open up without a problem. Trouble is I have several crucial application already created with the 3.4 builder that also have a lot of widgets already configured and I can't afford to re-create all of those again. I re-installed the 3.4 builder and I can see all of my copied 3.4 applications again. Has anyone else run into this issue? Mike Garza
... View more
10-02-2013
06:03 AM
|
0
|
4
|
749
|
POST
|
Gotcha, thanks for the clarification. What is the estimated time of release for Flex 3.5? Mike
... View more
07-08-2013
07:48 AM
|
0
|
0
|
611
|
POST
|
Thanks Bjorn, I am glad ESRI is looking into fixing this issue in the 10.2 release but you guys need to realize that most agencies are a year or more away from upgrading to 10.2. We really need a patch to be created for 10.0 and 10.1 users, which is 99% of current ESRI users right now. So, once you create the fix for the new version could you also create a patch that we can add into 10.0 and 10.1? This is more important to us than creating a fix for a new release that we will not use for at least another year. Thanks, Mike
... View more
07-08-2013
06:01 AM
|
0
|
0
|
611
|
POST
|
I have over 25 layers in my service that I want users to be able to extract from my service. The Flex 2.1 data extract widget had a scroll bar inside of the Step 2 portion of the widget. This would allow users to scroll through several layers and select the ones they wanted to extract. Since Flex 2.2 this scroll has been missing from the widget. It is now one large scroll for the entire widget. Can the ESRI development team please add the scroll bar back inside of Step 2, so if you have several layers users can select the layers that are toward the bottom? Please see attached picture. Mike
... View more
07-03-2013
01:51 PM
|
0
|
7
|
1265
|
POST
|
I have over 25 layers in my service that I want users to be able to extract from my service. The Flex 2.1 data extract widget had a scroll bar inside of the Step 2 portion of the widget. This would allow users to scroll through several layers and select the ones they wanted to extract. Since Flex 2.2 this scroll has been missing from the widget. It is now one large scroll for the entire widget. Can the ESRI development team please add the scroll bar back inside of Step 2, so if you have several layers users can select the layers that are toward the bottom? Please see attached picture. Mike
... View more
07-03-2013
01:45 PM
|
0
|
1
|
468
|
POST
|
I created a trouble ticket for this issue and here is an update from ESRI for anyone that might be running into this same issue. This is from a really helpful support analyst named Julia: "As I mentioned in my e-mail, this bug has just been reported within in the last couple of months (so I would imagine it is specific to one of the major updates). Looking at the details of the bug it seems like the behavior is reproducible with multiple Android users & has been marked as high severity. The bug has also already been exported to our development team which means that a fix is currently being worked on." I did ask her to pass on to this to the development team "it is great if you guys fix this bug in the new 10.2 version but you must also create a patch for the many users that will still be using 10.0 a nd 10.1. We are 6 months to a year away from upgrading to 10.2 and we need a patch that can be applied to the older and current versions." Mike
... View more
07-03-2013
11:58 AM
|
0
|
0
|
563
|
POST
|
I have a service that I am publishing in ArcGIS online. I can collect on any of my published layers with my iPhone collector app but when we try to use our Android phone it will only collect on one layer. We keep getting the error messsage "Edit not Applied" with the Android app. Has anyone run into this issue? The Android phone is a new phone with the latest software. Any info would be a huge help. Mike
... View more
06-28-2013
07:59 AM
|
0
|
10
|
753
|
Online Status |
Offline
|
Date Last Visited |
11-11-2020
02:23 AM
|