Latest Contributions by ChadRicks

‎07-14-2021

A dynamic guide based on a value instead of a static value is exactly what i need. Another solution that could work is the ability to add a line chart over a bar chart.

‎01-14-2019

For the Group Filter widget, how do i remove the html interface and have it behave like a toggle button? So one click it applies the filter and the second click resets the filter?

‎06-21-2018

Ok. I'm using WAB 2.3. I'll have to try out 2.8 and see if that issue is taken care of.

‎06-20-2018

The Group Filter widget sets all filtered layers to visible even if the layer in the web map was initially not visible. In the Group Filter Widget.js, I commented out a line from the setupFilterToApply fuction: //layer.layerObject.setVisibility(true); Now when i run the group filter the layers that are initially visible from the web map are shown. But, if I had gone into the layerlist widget and turned on and off different layers the group filter doesn't see what is currently visible. Is there a way to tell what layers are currently visible in the web map? then i could something like: if(layer.isCurrentlyVisible){ layer.layerObject.setVisibility(true); } else{ layer.layerObject.setVisibility(false); }

‎05-08-2018

Yep. After trying different things for hours playing with WKIDs and spatial references, I came to that answer right after I posted the question. Thanks Robert!

‎05-08-2018

Robert, I downloaded the cotBuffer.zip and added it to my web appbuilder and it works. My problem is the buffer distances don't match the map distances. I put the buffer distance as 10 miles and it draws a circle with 8 mile radius. What do i need to change to get the distances all the same?

‎04-09-2018

Were you able to figure this out? My portal (and Web AppBuilder applications with the print widget) can print my own services and i can print outside public services like https://geohealth.hhs.gov/arcgis/sharing/servers/11e49b2f31b04811a339cf0865806711/rest/services/LiveFeeds/USGS_Seismic_Data/MapServer But i get an error whenever there is a esri basemap involved. Here are the errors i get in arcgis server manager The certificate authority is invalid or incorrect (WinINet ERROR_INTERNET_INVALID_CA, 12045), URL = https://services.arcgisonline.com/arcgis/rest/info?f=json The certificate authority is invalid or incorrect (WinINet ERROR_INTERNET_INVALID_CA, 12045), URL = https://services.arcgisonline.com/arcgis/rest/services/World_Imagery/MapServer?f=json Error executing tool. Export Web Map Task : Layer "World_Imagery_1880": Unable to connect to map server at https://services.arcgisonline.com/arcgis/rest/services/World_Imagery/MapServer. Failed to execute (Export Web Map). Failed to execute (Export Web Map Task).

‎03-15-2018

This is my code that works. Hope this helps import arcpy import sys, os, smtplib, logging, datetime from arcpy import env # Set an gdb admin connection variable. adminConn = "//MACHINENAME/Scripts/ProdDBO_DefaultSDE.sde" # Set a few environment variables arcpy.env.workspace = adminConn arcpy.env.overwriteOutput = True print("Running compress") arcpy.Compress_management(adminConn) # Script arguments Points to the toolbox where the model is located arcpy.ImportToolbox("\\\\MACHINENAME\\Scripts\\FOMScripts.tbx") print "Run UpdateAllSpaces Model" arcpy.UpdateAreaAllSpaces_FOMScripts()

‎06-07-2017

I have several Dynamic Layers in WAB Local Layer Widget with a definition query. I just upgraded to ArcGIS Server10.5 and found the bug. I got the patch (ArcGIS Server 10.5 Layer Definition Query Patch ) downloaded and installed that then tried again and still get the error: {"error":{"code":400,"message":"Invalid 'layerDefs' is specified","details":[]}} this is the local layer config: "definitionQueries": "{\"1\":\"floor_name_snfs02 = '1st Flr'\"}" I also have a map switcher widget that uses ImageParameters layerDefs: var imageParameters = new ImageParameters(); var layerDefs = []; layerDefs[1] = "floor_name_snfs02 = '" + FLOOR +"'"; layerDefs[2] = "floor_name_snfs02 = '" + FLOOR +"'"; layerDefs[3] = "floor_name_snfs01 = '" + FLOOR +"'"; layerDefs[4] = "floor_name_snfs02 = '" + FLOOR +"'"; layerDefs[5] = "Floor = '" + FLOOR +"'"; layerDefs[6] = "floor_name_snfs02 = '" + FLOOR +"'"; layerDefs[7] = "floor_name_snfs02 = '" + FLOOR +"'"; layerDefs[11] = "Floor = '" + FLOOR +"'"; imageParameters.layerDefinitions = layerDefs; Is there a way to see if the patch worked or do i need to write the definition queries in a different format?

‎11-08-2016

I've used the buffer point tool in flex several times. When there was an incident and I had to display the incident location and a protective action of a 10 miles radius buffer around that point. Yes it didn't do anything or select anything but it displayed the protective action buffer instantaneously for everyone viewing the web app on the smart board. I could use the drawing tool and draw a circle and slowly drag out the circle until r=10 miles but at ten miles out my mouse isn't exactly on the point and there is some error involved. For me the buffer tool was useful just typing in the number after making a point.

‎11-08-2016

I really just was wanting to buffer a point like in the flex buffer widget http://www.arcgis.com/home/item.html?id=a950162cd17a4acc985132d40adfe38f

‎11-07-2016

Robert, Do you have or do you know of a buffer widget for WAB?

‎11-07-2016

Yep, my eyes skipped right over it. I was thinking the option was in a different section. Thanks again!

‎11-07-2016

Robert, I am using version 2.1 and when i start typing in a value instead of selecting from the drop down list for unique fields it is currently auto-populating to whatever field contains that letter or number. Can i have it auto-populate hint limited to "starts with" rather than "contains"? This is my config: "expressions": { "expression": [ { "alias": "Property Name", "textsearchlabel": "Property Name", "values": { "value": [ { "fieldObj": { "name": "Property_Name", "label": "Property_Name", "shortType": "string", "type": "esriFieldTypeString" }, "valueObj": { "value": "23-600" }, "prompt": "Property Name is", "textsearchhint": "Enter Property Name or choose from list", "sqltext": "Property_Name = '[value]'", "operation": "stringOperatorIs", "uniquevalsfromfield": "Property_Name" } ] }

‎10-10-2016

https://community.esri.com/thread/184265-simple-map-switcher-floor-switcher-widget

Online Status	Offline
Date Last Visited	a week ago

My Ideas

Latest Contributions by ChadRicks

Re: Serial Chart guide lines

Group Filter Modification to behave like LayerToggleButton

Re: Group Filter widget set visible layers

Group Filter widget set visible layers

Re: Assistance Building First Widget : Buffer Points?

Re: Assistance Building First Widget : Buffer Points?

Re: Error when trying to print from portal

Re: Executing Model through ArcPy

Problem with Layer Definition Queries for Local Layer Widget Server 10.5

Re: Roberts Custom WAB Widgets

Re: Roberts Custom WAB Widgets

Re: Roberts Custom WAB Widgets

Re: Enhanced Search Widget Version 2.13 - 09/25/19

Re: Enhanced Search Widget Version 2.13 - 09/25/19

Re: Custom Floor switcher widget WAB

Re: Serial Chart guide lines

Re: Click to zoom widget? Trying to figure out whe...

Re: Limit widget availability to specific users

Re: Roberts Custom WAB Widgets

How to change the esri logo link to custom link?

Experience Builder Custom Widgets