POST
|
Hi, I had the same problem recently and I believe I may have figured out a solution to this particular issue. Within the map layer that powers the web app you have the following settings at the bottom of the layer screen: Once you open that up you may go further down in "Show advanced options": Finally, I set that I want the "Start playback at" to "playback position saved with map", as shown below: And made sure that whatever I had in that underlying map was what I wanted to be default in the web app (collapsed the ticks on top of each other). Although this gave me quite reasonable results, I would say it was counter intuitive to have to set that in the underlying layer level as opposed to the "Time Slider" widget within the web app builder. Something for ESRI to consider in the future.
... View more
06-09-2020
09:38 AM
|
1
|
0
|
1028
|
POST
|
Thanks for the help! I tested that but it just lets me start a completely new survey. I need to access whatever I (as a submitter) have sent as response and change/update it. Furthermore, due to the length of this survey we really just want to allow the possibility and going back and changing some of the answers. Is this capability only available in the field app? Thanks, Alex
... View more
10-31-2019
07:04 AM
|
1
|
1
|
254
|
POST
|
Hi, I have recently created a survey which I need to be open to the public as well as have the survey open directly in the browser: Furthermore, this particular survey requires the users to be able to update their unique responses at any time: The survey is working quite nicely! However, once I try and use the same link in the same computer to update my submitted response, I get the following message: I cannot find a way to update my own sent survey response via the browser! Am I missing something fundamental here? Is the "update the response" only allowed in the field app? Thanks in advance, Alex
... View more
10-30-2019
04:37 PM
|
0
|
3
|
318
|
POST
|
Hi Phil, This new update fixed this particular step of my process completely and I've obtained the desired behavior from my survey! Good stuff! Thanks for the help! Alex
... View more
06-18-2019
09:08 AM
|
2
|
1
|
403
|
POST
|
I have a very similar situation where my layer is a polygon map (SRID 4326) sitting on top of a basemap with the same SRID. When I run the "Create Vector Tile Package" I keep getting the same error (Error 000707: https://pro.arcgis.com/en/pro-app/tool-reference/tool-errors-and-warnings/001001-010000/tool-errors-and-warnings-00701-00725-000707.htm) What bothers me is that I was to do the procedure by changing both the layer and the basemap to SRID 3857 following the same exact steps. No idea what I could be doing wrong... The thing is I want to keep everything under SRID 4326, not 3857!
... View more
04-12-2019
08:13 AM
|
0
|
0
|
449
|
POST
|
Hi Jim, Thank you for the information. Any idea when this release will happen? Alex
... View more
03-22-2019
06:57 AM
|
0
|
6
|
1095
|
POST
|
Hi Jim, My mistake, indeed the field app version is 3.3.64. I ran the XLSForm you attached and I think there is some issue with the survey when it comes to the required column. Even though "yes" is specified for all questions, I'm still able to send the survey out without answering them (I get a positive validation when validating input): Do you think that's because of the fact that we're using the relevant column simultaneously? How do I ensure the answers are mandatory? I believe this is not expected behavior. Thanks again, Alex
... View more
03-21-2019
06:56 AM
|
0
|
8
|
1095
|
POST
|
Hi Jim, First of all thank you very much for helping me out on this matter! Much appreciated! What I observed when trying to deal with the XLSForm I attached here (with the multiple "or" conditions in the relevant column for most of the questions) is that both the Survey123 Connect for ArcGIS (version 3.2.196) and the phone app (version 3.3.26) would not open/load the survey. It kept automatically closing whenever I tried to edit or fill out the survey. On a browser (Google Chrome) it did work considerably better. The performance drop I noticed was on getting a first response from the first page of the survey: it was taking about 15/20 seconds for the survey to respond once you clicked a drop down. It felt as if the survey wasn't fully loaded even though you could see the drop downs in the screen. Once it responded then the rest of the survey went smoothly. I'll implement the suggested changes from your attached survey and see what happens. I won't be able to get rid of the 50k rows in the external_choices sheet but the idea of using the categories will hopefully do the trick. Ideally I want to use the phone app as the method for filling out this survey. Best regards, Alex
... View more
03-20-2019
07:13 AM
|
0
|
10
|
1095
|
POST
|
This is what the survey would look like for a user just starting to fill it out. If I choose a certain condition it may trigger the survey to only show some of the questions. If I choose another condition (condition 23) the questions may or may not change. The problem is that a good amount of questions would appear for almost all conditions chosen. This is probably breaking the survey (my guess of what's happening) given the amount of "or" conditions in the XLSForm.
... View more
03-19-2019
09:41 AM
|
0
|
12
|
1095
|
POST
|
I have a survey with about 250 distinct questions which are all of the yes/no type. The idea of the survey is that a subset of these 250 questions will only appear if they are applicable (depending on a "condition" chosen by the person filling out the survey. Let's call these conditions 'condition_1', 'condition_2',...,'condition_150'). For example, if a person starts the survey and selects 'condition_22', then the survey will only show yes/no questions for what makes sense under that condition (could be questions 3, 67, 98, 99, 143). So, my approach was to use the relevant column and insert the conditions there. I insert all 250 questions in the "survey" tab of the xlsform and fill out the "relevant" column accordingly. So for example, if question 30 is applicable only under conditions 23, 57, 129, my relevant column would look like: ${variable}='condition_23' or ${variable}='condition_57' or ${variable}='condition_129' For the dataset that I have, some questions appear for all 150 conditions, so you would have ${variable}='condition_1' or .... or ${variable}='condition_150'. I implemented this survey and what I've been finding out so far is that the phone app and the Survey123 Connect for ArcGIS are both having trouble loading it up (it crashes 9 out of 10 times, making it unreliable for this task). The browser version doesn't crash, but it doesn't work properly. There is a noticeable performance drop (it takes about 20 seconds just to load the conditions you choose from) which I currently cannot get around. Am going about this wrong? Is there something simpler that I didn't realize I could've done instead? Thank you in advance!
... View more
03-18-2019
12:18 PM
|
0
|
14
|
2012
|
POST
|
About a week ago I started using Survey123. I was able to work with the desktop version, "Survey123 Connect for ArcGIS", create my first survey, and publish it. It was all very straightforward. Once I got to the point of testing the survey there were two options that I could choose: answer the survey on an internet browser or access it via the Survey123 app (android in my case). When filling out and testing the survey on the android app it all looked very good: - the interaction with the survey was nice - the survey design looked just like what I intended (based on how it looked in Survey123 Connect for ArcGIS) However, the browser version of the survey is nowhere near what I expected: - the design was very different from the app version - functionality was poor, with a lot of buttons located in weird places. It caused way too much confusion while filling it out. Is this something that other users have been experiencing? I've looked elsewhere and could not find any references to this issue. Any information would be of great help. Thank you in advance
... View more
02-27-2019
12:10 PM
|
1
|
1
|
2177
|
Title | Kudos | Posted |
---|---|---|
1 | 10-31-2019 07:04 AM | |
1 | 06-09-2020 09:38 AM | |
2 | 06-18-2019 09:08 AM | |
1 | 02-27-2019 12:10 PM |
Online Status |
Offline
|
Date Last Visited |
01-04-2021
10:18 AM
|