POST
|
I am also getting a failure to open the file error for Excel and CSV files. It is an SDE service (not hosted) on Enterprise 10.8.1 with a survey created in Connect 3.12. I tried attaching the files to this post but got a similar error! "Excel cannot open the file 'S123_7c9ce029fb2d4d20a981b5bb4f9cdc0e_EXCEL.xlsx' because the file format or file extension is not valid. Verify that the file format or file has not been corrupted and that the file extension matches the format of the file."
... View more
09-15-2021
06:07 PM
|
0
|
1
|
1567
|
POST
|
Hi @Anonymous User , Folder: Internal Storage\DCIM\<sourcefolder> Extension: .jpg Size: about ranges about 4-9MB
... View more
06-29-2021
09:42 PM
|
0
|
1
|
1150
|
POST
|
Hi @Anonymous User , Thank you for the reply. I am following up with the user on the questions you have raised. I also get the impression from the user that they have been successfully attaching images for a few days in a certain way, and then it 'breaks' and they have to find a work-around. (I am trying to get clarification on this). Incidentally, I did crank up S123 field app on Windows with the 'offending' tablet connected via USB to the computer and was successfully able to attach images from the folder that the tablet could not because it displayed them grayed-out. I should explain that the images are captured from a drone being controlled by an iPhone, then the images are downloaded to a laptop, then copied to a folder on the Android tablet, then the images are being attempted to be attached to a survey using the browse method from the folder created by the copy from laptop to tablet process. Cheers, Roger.
... View more
06-29-2021
02:26 PM
|
1
|
1
|
1153
|
POST
|
What would be cool is having parameters like the Range question; start, end and step.
... View more
06-21-2021
01:15 PM
|
0
|
0
|
702
|
POST
|
When I browse for an image, one folder, in particular, has image thumbnails that are grayed out. Images are copied from a drone to a laptop, to a folder created inside the DCIM folder. How can I find out why the images in this folder in particular on this particular tablet appear to be unavailable for selectability? Both of the folders in the image attached are inside the DCIM folder. Thanks.
... View more
06-20-2021
08:58 PM
|
0
|
5
|
1264
|
POST
|
In the end I did this: (round((${input_hours} * 2), 0)) * 0.5 and got this:
... View more
05-11-2021
03:19 PM
|
0
|
0
|
1532
|
POST
|
Hello, Can I round an input decimal to the nearest 0.5? Even better, can the spinner be programmed in steps of 0.5? I don't want to use range, as there is no maximum. Minimum and default=0.5 Thank you!
... View more
05-10-2021
08:34 PM
|
0
|
2
|
1600
|
POST
|
12-02-2020
06:50 PM
|
0
|
0
|
882
|
POST
|
I cannot find these two devices: Neutral Earthing (Grounding) Resistor Transformer with 3 windings; therefore needing at least 3 terminals: 110kV IN 33kV OUT 11kV OUT neutral connection(s) Any ideas would be helpful.
... View more
11-17-2020
07:24 PM
|
0
|
2
|
912
|
POST
|
Hi Phil, Thank you for your help, it is greatly appreciated. The second expression you created worked with the 'or' in the second if statement. It does highlight the clarity needed in question labels, hints, messages and notes! Thanks and regards, Roger
... View more
07-30-2019
03:06 PM
|
1
|
1
|
4917
|
POST
|
Hi Phil, I tried it and it hasn't quite worked. The constraint is still applied when both bank1 and bank2 are empty. The above should be OK. The above should also be OK because MEN is no higher than bank2. Regards, Roger
... View more
07-29-2019
06:14 PM
|
0
|
4
|
4917
|
POST
|
Thanks, Phil. I'm showing my lack of programming skills, then, by asking how I would write an expression. So far I have come up with: if(${bank1} != NaN, .<= ${bank1}, if(${bank2} != NaN, .<= ${bank2}, '')) Which means: if bank1 is not 'not a number' then constrain to less than or equal to bank1, if bank2 is not 'not a number' then constrain to less than or equal to bank2, else do not constrain. bank1 and bank2 are decimal fields, as is the M.E.N. field. Am I on the right track? Probably not, because I get this: Because both bank1 and bank2 are NaN, any value in MEN should be acceptable. A condition should only be applied if either bank1 or bank2 have a number. Thanks, Roger.
... View more
07-24-2019
02:01 PM
|
0
|
6
|
4917
|
POST
|
I used Connect; I can't remember what version. First published to Hosted FS from Connect (not from existing FS) on Aug 13, 2018. It would have been the latest at the time. Roger.
... View more
07-23-2019
07:29 PM
|
0
|
2
|
1502
|
POST
|
Thanks for the reply, Phil. Most of the fields available in the FS are available in the survey xlsx form. Certainly the one I would like to use in the survey 123 website are in the form. Roger.
... View more
07-23-2019
06:47 PM
|
0
|
4
|
1502
|
POST
|
Should I be able to see the same filter options in S123 website as the Feature Service Details? In the S123 website, I cannot see all the fields that I can see when filtering in the Feature Service Details. I want to see all records where M.E.N. is greater than Bank1 or Bank2. I can do it from Enterprise, but not the S123 Website. I only get a small subset of the available fields. Is this normal?
... View more
07-23-2019
05:59 PM
|
0
|
6
|
1586
|
Title | Kudos | Posted |
---|---|---|
1 | 06-29-2021 02:26 PM | |
2 | 01-29-2019 12:00 PM | |
1 | 11-06-2017 06:25 PM | |
1 | 06-05-2019 02:17 PM | |
1 | 06-05-2019 04:52 PM |
Online Status |
Offline
|
Date Last Visited |
Sunday
|