POST
|
Hello @lvargas Sorry for the late answer. Thanks for the info. I totally put this configuration on the side. I will start again this week and check with the provider about the reverse proxy configuration. Thanks again.
... View more
08-16-2021
06:32 AM
|
0
|
0
|
1017
|
POST
|
Hello, We are running ArcGIS Enterprise 10.8.1 on a windows server. All the components are installed on the same machine : portal, server (each with a web adaptor), datastore. Everything is working well as it should on the internal network. For an external access, we are using a reverse proxy. However when loading the page we have an error in the web browsers: DNS_PROBE_FINISHED_NXDOMAIN . It is the first time I see this error message with portal. I did not set up the reverse proxy, the windows server provider did it for us. I told them Portal did not accept more than 1 DNS. I check the forum, and found some hints, like the webContextURL. We tried and with the WebContextURL configurated, we end up with a too many redirect error. If someone had the same issue or has some idea on how to solve this it would be great. Thank you. Melanie
... View more
02-15-2021
08:01 AM
|
0
|
2
|
1419
|
POST
|
Hi Owen, I am trying to do the same with the new StoryMap platform. Are anchors a possibilityy? I tried your solution but it brings me back to the opening of the storymap and no to the point I want people to go to. I am using the guided Map Tour. It's a really cool template and fits perfectly our needs. However we would like to share some points with people and get them exactly to a location. Let say I am making a post on the Huntington Library, I would like to give the URL with the anchor so they can get there directly without running through the all story. Thanks for the help, Mélanie
... View more
02-15-2021
03:00 AM
|
1
|
0
|
1393
|
POST
|
Hi everyone, We are trying to get this WMTS to work in our enterprise environment: https://ows.asitvd.ch/wmts? We get an error when we add it as a layer in portal for arcgis (it cannot add the service as it does not seem to recognize the URL) . It works fine in open AGOL, ArcMap and ArcGIS Pro. We tried the following: - Updating the proxy hosts Security>Config>Update Security Configuration - Trying to add the WMTS as a basemap in portal - As we are in a very strict IT infrastructure we gave our IT department the URLs we need to access for mapping: everything is ok on their side - we added https://ows.asitvd.ch from trusted servers in the portal but it didn't work either - we queried the following url: https://webadaptor.domain/portal/sharing/checkURL.jsp?url=https://ows.asitvd.ch/wmts/1.0.0/WMTSCapabilities.xml We got the following results: {"secured": false, "httpStatusCode":200, "httpStatusMessage": "HTTP/1.1 200 ok", "httpResponse":" ", "url":"https://ows.asitvd.ch/wmts/1.0.0/WMTSCapabilities.xml" } Did some of you got a similar issue? I still think that there is an issue with the allowProxyHost in the portal configuration but I am not sure how to solve it. Thanks for your help! Best, Mélanie
... View more
10-28-2020
09:24 AM
|
0
|
11
|
2530
|
POST
|
Hi Jonas, It was not related to the patch. We ask the IT department to re-issue a new certificate for us and it worked. I guess the format was not correct in the first place. Best, Mélanie
... View more
10-28-2020
08:49 AM
|
0
|
0
|
1387
|
POST
|
Hello, i am interested in installing my development environment on the cloud. I saw that I could use the enterprise builder for cloud and I will get all the components on one machine. I was wondering if someone can recommand the best practices regarding the web adaptors? Do I need to get one for portal and one for server? Or if I have a reverse proxy they are not mandatory? And if I want to get a database, can I install SQL server express on the same machine, or is that supposed to go on another server? I only deplyed architecture on premises, and cloud is totally new for me. Thanks. Mélanie
... View more
09-15-2020
06:23 AM
|
0
|
1
|
542
|
POST
|
Hello, Thanks for replying and sorry for the delay in answering. None of the portals are public. Everything is on the company intranet. I can access both portals just fine.
... View more
07-20-2020
02:40 AM
|
0
|
0
|
2868
|
POST
|
Hi everyone, I am trying to set collaborations between the portals of our organisation. I followed the following online ressources : https://enterprise.arcgis.com/fr/portal/10.7/administer/windows/configuring-the-portal-to-trust-certificates-from-your-certifying-authority.htm https://enterprise.arcgis.com/fr/portal/10.7/administer/windows/create-a-collaboration.htm#ESRI_SECTION1_A492E8BC60B245E1952FCBBC97E70FA7 https://enterprise.arcgis.com/fr/portal/10.7/administer/windows/create-a-collaboration.htm It seems that the host portal cannot reach the portal I want to invite. Which is strange because the invited portal is working fine. I can reach it with and without the Web Adaptor. I checked the following parameters: 1/ Root and intermediate certificates for the host portal have been added 2/ All the URLs are in https 3/ Pop-up windows are allowed in my web browser Regarding the web adaptor we are using an alias. Could it be that a WebContextURL is missing from the properties? If anyone had the same issue, it would be cool to know how you managed to make it work. Thanks, Mélanie
... View more
07-08-2020
01:25 AM
|
0
|
8
|
3080
|
POST
|
Hi, Sorry for the delay. Thanks for the complement of information. Mélanie
... View more
07-08-2020
01:12 AM
|
0
|
0
|
954
|
POST
|
Hi everyone, We connect to our portal with ADFS. Behind we have AD et LDAP. Everything is working fine, but I was wondering how we can access SAML logs? I would like to know how can see logs on how token are used/consummed, how the claims are passed etc. I find the capacities for debugging a bit light. We used SAML tracer but it's not enough for our IT department. I also used the logs from portal, but even debug or verbose logs do not get me anything. If anyone has an idea or advice it would be great. Thanks, Mélanie
... View more
06-10-2020
04:17 AM
|
0
|
2
|
1019
|
POST
|
Hi sorry for this. Here is the link I shoudl have referenced: Share branch versioned data—Geodatabases | Documentation I tried the branch versioning and did get this "Version Management" box to tick under capabilities when I was sharing my web layer. I really like the branch versioning capacity, and how it makes the versioning workflow easier (at least in our case). Thanks for all the info. Best, Mélanie
... View more
05-27-2020
01:01 AM
|
2
|
2
|
1694
|
POST
|
Hi Derek, thank you for the reply and the links, they are helpful. For the last question about ArcGIS Pro, I apologize my comment was not clear at all. I found the management tools for the versions, I tried them and it worked perfectly fine. I saw in the onlinde documentation that when you publish a web layer (with branch versioning), ArcGIS Pro proposes the option "Version Management" under Capabilities, like in this picture https://pro.arcgis.com/en/pro-app/help/data/geodatabases/overview/GUID-0A57135F-E1EA-4519-8426-B2F7BCAC6718-web.png I tried and this option didn't appear, so I was wodering if I forgot something in the process. Thanks for the tips!
... View more
05-25-2020
02:25 AM
|
0
|
4
|
1694
|
POST
|
Hello, I have been asked to register as versioned our data in arcGIS Enterprise. Now I tried to publish some feature layer as editable layers. Unfortunately I can only edit the the attributes. I am using ArcGIS Pro 2.4 and AGEnterprise 10.7.1. I found a lot of documentation online, but things are really not clear to me. Do I need a branch version to edit my feature layers in portal then reconcile and reinject? If I checked "register the objects with the option to move edits to base", do I need a branch version? In ArcGIS Pro I cannot see the option "Version Management". Thank you for your help. Cheers, M.
... View more
05-18-2020
04:13 AM
|
0
|
6
|
1810
|
POST
|
Hello, Just got this question from some of our communication team. They want to add a custom feed of news on the main page of our ArcGIS Enterprise portal. I looked both on French speaking and English speaking communities, and I didn't find anything that potentially looked like what they want. 1/ I suppose it would be possible to hard coded it? 2/ I proposed to keep it simple and just make either a Site to get the last layers/maps/apps published on the portal, either create a StoryMap with the latest news reagrding our Geomatics department. Does anyone maybe created a news feed in the portal? Or do you have any ideas? Thanks, Mélanie
... View more
04-29-2020
03:11 AM
|
1
|
0
|
342
|
POST
|
Hello, We successfully activated the groups in portal to link our AD groups to portal groups. We are uing ADFS as identity provider because the company is splitted into two entities. One uses AD, the other one LDAP. I create a group Test, and linked it to one of our AD group. The group is visible by the organisation entirely, and this group appear under My Groups, as I belnged to it in the AD. Now, I am having trouble understanding if the content of this groups can be private or not. For now, my colleagues can see the group, which is not a problem. My problem is that they can see the content of this group and they shouldn't. I checked and the content is only shared with this group. Why the organisation can access it? is there a way to keep the content hidden or private? Like you can see the group but not the content? Thanks. Best,
... View more
04-24-2020
06:00 AM
|
0
|
0
|
331
|
Title | Kudos | Posted |
---|---|---|
1 | 04-29-2020 03:11 AM | |
1 | 02-15-2021 03:00 AM | |
2 | 05-27-2020 01:01 AM |
Online Status |
Offline
|
Date Last Visited |
08-18-2021
10:01 AM
|