POST
|
Good Day All, What am I trying ? I am trying to run a url query against a webmap and return all the parcels with the same group id. We want to add this to a report to insert a map showing only selected parcels on a basemap background. My Problem at the moment ? I am not sure if this can be done the way I want to do it. I have a parcel layer with parcels grouped with a unique id. (See parcels colored according to the group id PICA.jpg) I run the following url query against the webmap. http://xxxxxx.maps.arcgis.com/apps/webappviewer/index.html?id=xxxxxxxxxxxxxxxxxxx&query=EOIDescription,EOI=’EOI2017_00230’ The group of parcels are selected, 11 in this case. In the browser it shows one parcel selected with a popup window on it, the popup show 11 parcels seleceted. By clicking on the play button you can scroll and see the attributes for all 11. Is there a way of showing all 11 parcels selected on a map without having the popup ? Thanks for the support. Regards
... View more
02-27-2017
04:05 PM
|
0
|
0
|
611
|
POST
|
Hi Brian, Did you manage to find a solution to this problem ? Kind Regards
... View more
10-16-2016
10:48 PM
|
0
|
0
|
758
|
POST
|
Thank You Doug, Just what I wanted to know. Kind Regards
... View more
09-01-2016
03:11 PM
|
0
|
0
|
307
|
POST
|
Good Day, Is there a way to update the location of an exciting point in Collector using the device gps ? I have a point layer in a offline collector map, I need to update the locations using the gps without changing the attributes. Taping the screen to move the point compromises the accuracy of the data. I could capture the points again but will have to redo the attributes. Any advice or suggestions ? Kind Regards
... View more
08-29-2016
11:13 PM
|
1
|
2
|
1684
|
POST
|
Hi Russ, What happens after running the tool against the data ? Will it sync during this process or is there steps after that to complete the job. Kind Regards
... View more
03-30-2015
01:55 AM
|
0
|
3
|
957
|
POST
|
Trill, Thank you for your time. I have installed all at home on my pc to see if it's something on my network at work that prevents it to work. But no luck I get 100% same error at home.
... View more
03-26-2015
02:10 AM
|
0
|
0
|
614
|
POST
|
Trill Thank you for the response. I have done as suggested above . Still got the error as below. I must be doing something wrong. I also tried some of the above mentioned proxy setting. I have tried the SETX and I have tried the def get_response as mentioned in your post above.
... View more
03-25-2015
10:18 PM
|
0
|
2
|
805
|
POST
|
Trillium, I am trying to use your BackupServiceAttachments.py. I am not a python expert, so I am doing what I can to try to get this working. I need to get this script working for my project, it does exactly what I need done. I have changed the relevant sections like. serviceTodayString = serviceYesterdayString = When I run the script it creates the folder and then stops with the following error. {u'message': u'Unable to generate token.', u'code': 400, u'details': [u'Invalid username or password.']} I am not sure where I should be adding my username and password ? There is a few places in the code where username and password gets mentioned. Can you please give some direction even if you just give me the line where the username and password should be entered. Kind regards
... View more
03-24-2015
04:41 PM
|
0
|
4
|
805
|
POST
|
Thanks Zac, I should have mentioned that I am trying to do this on a computer with no ESRI sodtware installed only python. Jake's looks like it should be able to do it. I am just trying to get that script working. Regards
... View more
03-15-2015
07:56 PM
|
0
|
0
|
902
|
POST
|
Jake, I am a bit confused. I have a AGOL feature service with 13700 points in one layer. 3 photos for each point will be added to the feature service. I was told by ESRI support to chunck my data to more manageable sizes as this feature service might grow to big to handle. They suggested between 1000 - 2000 record/data chunck should be resonable to handle. I am currenly struggeling to get more than a 1000 records downloaded into a local copy. My plan. Contractors will visit these points and do some attribute updates and changes. They will also take 3 photo/Site and upload that to the service. I want to be able to run a scrpit to download records from a feature service with the attachments. Extract the attachments to a folder and create a dbf/spreadsheet with a hyperlink to open the photo. This is what the above mentioned script should be able to do if I am not mistaken ? Because of the volume of data I was thinking to cut my one big feature service into about 13 smaller feature services (one layer each) or should I have one feature services with 13 layers (Layer chuncked) in it. Use one map to give collector access to edit the data. I would then be able to run the script against any one of the 13 feature services and extract the attachments and spreadsheet for futher use. Is there a beter way of doing this or am I on the right track ? Multiple layers -> One feature service -> one map -> Collector app Multiple Layers -> Multiple feature services -> one map -> Collector app Single layer -> single feature service -> single map -> Collector app (for each chunck of data 13 in total) Any suggestions welcome ?
... View more
03-11-2015
06:35 PM
|
0
|
2
|
4607
|
POST
|
Jake, Sorry for not replying to your email. I am just struggling with my dataset. It’s too big and I am trying to cut it into smaller chunks. My feature service have almost 14000 points in it, Each point will have 3 photos attached. So I realized to make this work more efficient I will have to cut my data chunks to about 1000 points and have multiple feature services serving data to a single webmap. Other problem is we have done a pilot project on the data and we have done about 900 so far. How can I transfer the attachments when I start chunking the data ? I am in the process of doing just that. I am struggling to get you a sample data set because I have no control over what records I can pull from AGOL. I found the “Update Definition” option and changed the max record to 2000 but still I can only see 1000 record when I open the service in ArcMap. Kind Regards
... View more
03-05-2015
08:43 PM
|
0
|
4
|
4607
|
POST
|
Jake, I am struggling to get this working. This is exactly what I need to do. I want to extract my table to a spreadsheet with a hyperlink pointing to multiple photos for a single record. I have tried running your script. I am not a programmer but only a user. First I tried running it in IDLE but it came back with : Traceback (most recent call last): File "C:\temp\extract_photos_Test\2Photos.py", line 45, in <module> for row in cursor: RuntimeError: Objects in this class cannot be updated outside an edit session [WaterSamplingPoints] The I tried running it in ArcMap 10.2.2 and got the following error : Traceback (most recent call last): File "C:\temp\extract_photos_Test\2Photos.py", line 49, in <module> row[1] = path + os.sep + dict[key][1] IndexError: list index out of range Failed to execute (Script). Can you please give some advice ? Regards
... View more
03-02-2015
03:49 PM
|
0
|
9
|
4607
|
POST
|
Lars, Did you manage to get past the 1000 record problem ? Regards
... View more
02-26-2015
08:48 PM
|
0
|
0
|
838
|
POST
|
Stace, Using Desktop 10.2.2. Any work around for this problem ? I am having problems with this. I have a AGOL feature service with attachments. Do not want to loose the link between the data and attachments. I am able to update values in a field and sync back to AGOL from desktop with no problem. Adding a field does not give me an error when I sync, it's just not visible in the AGOL feature service. So nothing happens. No new field added to the service. How can I add fields, sync back to AGOL without publishing again ? If It wasn't for the attachments I would not have had a problem to replace, but this removes all the attachments. Anybody with ideas or tips ? Regards
... View more
02-26-2015
06:34 PM
|
0
|
1
|
539
|
POST
|
Hi I solved my problem by going back to my mxd. Redoing my categories for my difrrent symbols and publishing it back to ArcGIS online. Hope it helps. Regards
... View more
04-07-2014
02:20 PM
|
0
|
0
|
841
|
Title | Kudos | Posted |
---|---|---|
1 | 08-29-2016 11:13 PM |
Online Status |
Offline
|
Date Last Visited |
2 weeks ago
|