POST
|
English below Bonjour à tous, La question qui va suivre n’est pas complexe, mais j’ai difficile à trouver quelle direction je dois prendre pour mener à bien mon projet et atteindre mon objectif. Notre organisation comporte un nombre important de bâtiments (principalement des écoles). En dehors des horaires de cours ou pendant les vacances, un nombre important de locaux (classes, réfectoire, sanitaires, …) sont loués à des organisations tiers pour, par exemple, proposer des stages ou des cours de musique. Pour réaliser l’inventaire des locaux mis à disposition, il est proposé de réaliser un formulaire d’encodage afin que les agents en charge de cette thématique puissent indiquer, pour chaque tiers, les locaux occupés. Exemple d’encodage : L'entreprise X occupe les locaux A, B, C, D tous les mardis de 16h à 18h. L'entreprise Y occupe les locaux B, D tous les mardis de 18h à 19h. L'entreprise Z occupe le local D tous les lundis de 20h à 20h30. Il est également possible, dans certains cas, qu’une entreprise occupe + de 20 locaux en même temps (un bâtiment au complet, par exemple) L’idée est qu’une personne encode les informations liées à un occupant (Nom, Jours d’occupation, Heures, …) et les informations liées aux locaux (Local A, B, C, D, E, F, G, …). Je possède déjà un feature layer avec tous les locaux que mon organisation possède (+ 11 400 entrées). Je me demande comment faire pour qu’au moment de l’encodage, l’utilisateur puisse sélectionner plusieurs locaux (considérant qu’il doit pouvoir dans certains cas en sélectionner beaucoup) et qu’ensuite la donnée soit liée à ma couche de polygone afin que l’occupant soit rattaché aux locaux en question (relation de 1 occupant à plusieurs locaux). Avez-vous des idées à me communiquer ou une orientation à me proposer ? Je maitrise Survey123 et XLS Form) Merci d’avance, Alan Hi all, Forgive my broken English. The question that follows is not complex, but it is difficult for me to find which direction I should take to carry out my project and achieve my goal. Our organization consists of a large number of buildings (mainly schools). Outside school hours or during holidays, a large number of premises (classrooms, refectory, sanitary facilities, etc.) are rented to third parties to, for example, offer kids activities or music lessons. To carry out the inventory of the premises made available, it is proposed to make an encoding form so that the agents in charge of this theme to indicate, for each third party, the premises occupied. Encoding example: Company X occupies premises A, B, C et D every Tuesday from 4pm to 6pm. Company Y occupies premises B and D every Tuesday from 6pm to 7pm. Company Z occupies room D every Monday from 8pm to 8.30pm. It is also possible, in some cases, for a company to occupy 20+ premises at the same time (an entire building, for example) but I would like to take the problems one by one. The idea is that a person encodes information related to an occupant (Name, Occupation Days, Hours, ...) and information related to the premises (Local A, B, C, D, E, F, G, ...). I already have a feature layer with all the premises that my organization owns (+ 11.400 entries). I wonder how to ensure that at the time of encoding, the user can select several premises (considering that he must be able in some cases to select many) and then the data is linked to my polygon layer so that the occupant is attached to the premises (ratio of 1 occupant to several premises). Do you have any ideas to share with me or a direction to offer me? (I master Survey123 and XLS Form) Thanks in advance Alan
... View more
05-08-2023
01:18 PM
|
0
|
0
|
196
|
IDEA
|
Bonjour, Merci pour votre retour. Oui, effectivement, j'utilise le widget FILTRE et pas LISTE car avec je n'arrive pas à faire une liste déroulante qui reprend l'ensemble des éléments (uniques) d'un champ avec les listes. C'est possible avec la liste ? Par ailleurs, ci-dessous les images des options pour réaliser une liste déroulante avec le widget FILTRE : Hi, Thanks for your feedback. Yes, indeed, I use the FILTER widget and not LIST because with it I cannot make a drop-down list which includes all the (unique) elements of a field with the lists. Is it possible with the list? In addition, you can see up with pictures the options for creating a drop-down list with the FILTER widget.
... View more
07-01-2021
06:11 AM
|
0
|
0
|
3402
|
IDEA
|
IN ENGLISH BELOW Bonjour, J'aimerai également réalisé cette opération mais je n'arrive pas. Je m'explique : J'ai une couche cartographique (carte) qui comprend différents bâtiments d'un campus. J'ai ensuite ajouté un widget "filtre" (sous forme de liste déroulante) pour que les utilisateurs puisse sélectionner le bâtiment qui les intéresse. Mon souhait que lorsqu'un bâtiment est sélectionné dans la liste, un zoom soit réalisé sur la carte. Suivant vos explications, j'ai été dans les "actions" de ma "carte" pour "ajouter un déclencheur". Ensuite j'ai choisi "modifications de sélection d'enregistrements" puis cliqué sur "Structure" et enfin sur "sélectionner les enregistrements". À ce moment-là, je dois choisir dans les paramètres de l'action les "données sur déclencheurs" et les "données de l'action". Cependant, dans aucun des deux je ne peux choisir ma liste qui doit être la source. Est-ce que j'ai raté quelque chose ? Merci d'avance pour votre aide. Hello, I would also like to carry out this operation but I cannot. Let me explain: I have a cartographic layer (map) that includes different buildings on a campus. I then added a filter widget (dropdown list) so that users can select the building they are interested in. My wish that when a building is selected in the list, a zoom is carried out on the map. Following your explanations, I was in the "actions" of my "map" to "add a trigger". Then I chose "record selection modifications" then clicked on "Structure" and finally on "select records". At this point, I have to choose in the parameters of the action the "data on triggers" and the "data of the action". However, in neither of the two can I choose which list should be the source. Did I miss something? Thank you in advance for your help.
... View more
07-01-2021
01:44 AM
|
0
|
0
|
3422
|
POST
|
Hello Robert, Sorry to not have answered directly but I wanted to come back with a complete version of my project to share with other users. In the meantime, thank you already for answering my question. Best regard. Alan.
... View more
05-28-2020
11:57 PM
|
0
|
0
|
1279
|
POST
|
To start, sorry for my rough English but I speak French. I would like to create a new application with, on the right of the map, a toolbar that would contain several widgets. Then I would like the content of each widget to open in another div. I followed this discussion but I can't seem to position the widgets vertically and make their content visible in another div. Attached is a view of the application design Thank you in advance for the help you can give me. Ps: i'm webdesigner but new in javascript.
... View more
05-18-2020
03:56 AM
|
0
|
2
|
1447
|
POST
|
Thanks. But I meant by this question that you can go in the sendbox in Survey123 app, and there you can edit the answers. The only thing you can't edit are the images. So, considering I havn't attached any documents yet via Arcgis Collector, can't I edit my features and add the attachment at the "right place"? If not, it would be an interesting update to work on, in my opinion. Anyway, thanks a lot for your answers!
... View more
04-18-2019
05:25 AM
|
0
|
1
|
1324
|
POST
|
Thanks Philip! And do you know a way I could avoid using Python, by example by editing my existing features and directly add the attachment in the image section desired? Tanks in advance, Quentin.
... View more
04-18-2019
04:07 AM
|
0
|
3
|
1324
|
POST
|
Ok sorry then, I wasn't sure if Philip was dealing with the same issue. So, to explain my problem : I created a first inquiry few month ago into "Survey123 Connect", in which the users had to fill informations and to attach 2-3 pictures (type "image" in xlsform). The thing is that I had to make an upgrade of the inquiry and to add some fields, but it appeared that I lost all of my attached images. Fortunately, I had a copy of those pictures, so I just needed to edit the previous features and to attach them. I didn't find any way to edit images in existing features via Survey123 (mobille app or survey123.com), so I decided to proceed by using Arcgis Online. The thing in proceeding that way is that in Survey123, my pictures doesn't appeared as "Photo1", "Photo2" and "Photo3" anymore, but as "Attachments" (see Annex 1). Only new encoding , as shown in Annex 2, acts correctly. It's not a huge problem as I can consult the pictures anyway by Survey123.com. The issue is that I can't find a correct way to insert the attachments into a report. I saw a few discussions about this, but I never managed to find a correct way to export correctly all the attachments into the report generated (Annex3), but only get one of them. I'm not sure I'm getting clear enough? Anyway, thanks for your help! Quentin.
... View more
04-15-2019
01:07 AM
|
0
|
5
|
1324
|
POST
|
Hi! No answer to this issue? I'm facing the same problem. I had to attach some pictures to my report, and I'd like now them to show into the exported report. I only managed to display one of them by using ${attachment |size:250:0}. Any idea of how I could adapt this? Thanks! Quentin.
... View more
04-11-2019
06:50 AM
|
0
|
7
|
1324
|
Online Status |
Offline
|
Date Last Visited |
02-28-2024
04:58 AM
|