• Drone2Map not producing any output when I run it?

    I started using Drone2Map last year and it worked.  I am using version 1.3.2.232.  I haven't used it in several months until yesterday.  Starting yesterday, when I try to process drone imagery, I don't ...
    klegleiter
    last modified by klegleiter
  • Edges being cut off, nothing obvious in processing report

    When processing completes, the images around the border of my aerial data do not get displayed. I've included a few screenshots to illustrate what I'm talking about. As you can see, there are quality images for the fa...
    adam3039
    created by adam3039
  • Can I use Control Points?

    I'm new to drone2map and testing it out.  I see how to add GCPs, but how do you identify/create check points?  I've done a bit of googling and haven't found an answer yet.  My experience is primarily wi...
    weipad1
    last modified by weipad1
  • Where can I find data that represents high risk areas (residential, city, suburban, urban) that are no fly zones for drones?

    Purpose: No fly zones for drones Seeking data on no fly zone areas that make up... - residential - cities - suburban - urban   used in ArcGIS Online Jessica Rosales (JRosales_GIS) #UofRedlands 
  • Details: object reference not set to an instance of an object

    I'm using drone2map trial. When I try to login I get this error: An unexpected errors .... Details: Object reference not set to an instance of an object     Any help or tips would really appreciate it.
  • Drone2map flight path change

    I have  a small area that I'm trying to create 2D products for. My flight path is an aerial grid and I have 55 images.I added surveyed GCPs and linked 3 of the GCPs to ~14 images each. My overlap was 80% at 350 f...
    deleted-user-7DCz1T2FuzMM
    last modified by deleted-user-7DCz1T2FuzMM
  • Consistent processing failure immediately after substep Camera Calibration?

    So far in my trial of D2M, I've only managed to complete one 2D project. Since then, I consistently get an Unknown Exception Error which according to the log occurs immediately after (or during?) substep Camera Calibr...
    cymrych79_G_P
    last modified by cymrych79_G_P
  • Offline Mode not working in Parallels - configured to work on another workstation

    I am trying to open Drone2Map on the same machine where I activated it to work offline.  In doing so, it asks me to log-in to the account and then I type in the credentials I get the following error: "The accoun...
    cjbowles
    last modified by cjbowles
  • Data Not Accessible

    I have just downloaded Drone2map application. I have an existing ArcGIS Online account with my organization. After Installation, i tried to log in with my arcgis account but i keep getting a pop up error that says Dat...
    m.smart
    last modified by m.smart
  • "Not Enough Tracks" error in Drone2Map

    When I process this model (see image) in Drone2Map, it keeps throwing the error "Not enough tracks!" Has anyone else encountered this or a similar error? If so, how did you resolve it?   Thanks in advance to anyo...
    yuhuinnovation_BPS
    last modified by yuhuinnovation_BPS
  • Custom geoid in d2m?

    Total d2m newbie here, and have just got same data related to a supportcase (Norwegian distributor).   My client has GCP's which are surveyed by professional RTK and corrected for the (quasi)geoid which is the b...
  • Best Practices for Processing Images in Cliff Areas

    I frequently fly in reservoir areas that sometime contain large cliffs.  Most flight planning softwares do not have terrain awareness so the AGL height of the drone will not adjust with the terrain.  Maps Ma...
    EthnotechLLC
    created by EthnotechLLC
  • Using Drone2Map to map an area for ecological studies

    Hello everyone, I am planning to use Drone2Map and a DJI Mavic 2 Zoom to obtain 3D point cloud data from a natural site where there are trees, shrubs, open areas and mountains. We cannot afford a LIDAR scan so Drone2...
    kaanozg88
    last modified by kaanozg88
  • 'Create Orthomosaic' is checked in Processing Options, but none is actually created

    Hey everyone,   I'm using a d2m trial, and am having trouble getting it to create my orthomosaic. 'Create Orthomosaic' and 'Merge Tiles' are checked in processing options, I can watch it being processed in the P...
    MarkTryon
    last modified by MarkTryon
  • Drone2Map 3D: What am I looking at?

    I ran my first 3D analysis on a Drone2Map project, and I can't figure out what I am looking at.   In Drone2Map,  why does the 3D Mesh appear to be about 100m in the air above the background imagery surface?...
    huffmanp
    last modified by huffmanp
  • Values for Camera Optimization are high

    I'm generating orthos with a Phantom 4 Pro, using a 80% forward and 80% side overlap for flights at 100 meters and am routinely getting high values for the relative difference between initial and optimized internal ca...
    jwschilling
    last modified by jwschilling
  • When adding GCPs into D2M, does D2M account for the accuracy of those GCPs in its processing?

    After running a project with GCPs, the generated report shows that I used GCP in the analysis process. However, I'm not sure how that RMSE under Quality Check/Georeferencing was calculated. Does D2M take into account ...
    viTranLday
    created by viTranLday
  • Can I not mix coordinate systems in Drone2Map?

    I am using Drone2Map 1.3.2.  I have a collection of photos that were collected with a drone flight that are in WGS 84.  I ran them without the ground control points and got some nice looking mosaic...
    huffmanp
    last modified by huffmanp
  • Drone2Map - GCP's

    I am new to Drone2Map and have it on trial. I currently use Drone Deploy for all my processing. However I use other ESRI products so makes sense to see if Drone2Map could replace DD. I have had some early problems not...
    JeremyMurfitt
    last modified by JeremyMurfitt
  • Drone2Map: How to adjust image altitude in EXIF metadata from DJI Drones

    I just went through a workflow that I wanted to highlight here in case it helps anyone with post processing drone images in Drone2Map.  This is for those people using DJI drones.  Sorry if this has already b...
    EthnotechLLC
    last modified by EthnotechLLC