• Drone2Map upgrade when Pix4D updates

    Hi, a few days ago Pix4D announced major improvements (https://www.pix4d.com/blog/new-photogrammetry-software). How does D2M match up with improvements in Pix4D in terms of releases? (working on an offer for a small...
  • Point cloud / mesh beneath ground elevation and basemap

    I just generated a 3D point cloud / mesh and in Drone2Map and Pro it is beneath the ground elevation and basemap. What is going on here?
    ibroad
    last modified by ibroad
  • Measure Tools not enabled

    Hi,   In Drone2Map I have created my .las point cloud from imagery, but cannot figure out how to calculate volume with it.  I have 3D Analyst, but when I select the layer in D2M the various Measure tools ar...
    bullab
    last modified by bullab
  • Assisted Links Error

    I am testing the new Assisted image links feature and after adding the first link, it seems D2M is not estimating the location of image links for the remaining images.  I am not seeing the crosshair icon or the c...
    TrentR
    last modified by TrentR
  • "A core license could not be found."

    Trying to run Drone2Map in a disconnected environment. We have licenses for Drone2Map in the portal, but get the message "A core license could not be found" as soon as I try to log in to the portal when starting Drone...
    MrSmaaland
    last modified by MrSmaaland
  • Do we have a contact at Esri for the Drone2Map?

    Have some questions on the drone and the drone2map software.  I couldnt find a contact at Esri ?
    gisteacher
    last modified by gisteacher
  • Converting from WGS84 to NAVD88

    I have a DJI drone that captures all data (horizontal and vertical) in WGS84 (meters). I want to be able to process the drone data so that the result is in NAVD88. I am doing the data processing in Drone2Map and the o...
    gaspiras01
    created by gaspiras01
  • Export Volume Measurements as SHP or Feature

    I think this is more of a product enhancement request.   I know we are able to get volume measurements in the Drone2Map tools. Is there a way to export those volume drawings as a shapefile or a feature class to ...
    comptokj
    created by comptokj
  • Drone2Map system clock error

    I just installed the August 2019 release of Drone2Map and licensed it with my authorized named user. I also "took it offline" prior to closing the app, in prep for use in the field or without internet. I closed the ap...
    amber_brooks
    last modified by amber_brooks
  • Why is drone2map 2 only showing 5 digit accuracy for gcp

    My gcp are I put from csv file with 7 digit accuracy.  Why are they reduced to 5 digits when shown on gcp table and on map
    WERIGISAdmin
    last modified by WERIGISAdmin
  • Using thermal images from a FLIR XT2

    Has anyone had experience creating an orthomosaic using thermal imagery from a FLIR XT2?    The FLIR XT2 takes both RGB and thermal images simultaneously. The RGB orthomosaic turned out just fine. The therm...
    darcyb_2000
    created by darcyb_2000
  • Looking for Best Practices for Capturing Corridor Imagery Using Drone for Drone2Map

    I am looking for best practices for establishing a drone flight for a corridor type project.  What are the suggested setting for imagery capture during the pre-planning of the mission?  I'm interested in set...
    dkunz_cs
    last modified by dkunz_cs
  • Why is Elevation [Z] required in Import Control?

    I flew a project and located GCPs with only a known horizontal accuracy. I don't know the elevation or vertical accuracy. Am I hosed? I cannot run Import Control (via feature class) until I populate Elevation [Z] with...
    rayjaw
    created by rayjaw
  • Uncalibrated images Drone2Map

    Can any1 tell my why only 34 out of 317 images have been calibrated and used for this orthomosaic? And how do i increase this to make a complete mosaic for all my images? I have been using the alternative calibration...
    jeraf_MST
    last modified by jeraf_MST
  • Drone2Map Monthly Limits?

    Hello,   I am trying to find out if Drone2Map has a limit (monthly or annually) for the number of projects and/or images that you can process with a single subscription. For example, I believe Pix4Dmapper has a ...
    owensmd
    last modified by owensmd
  • Can Drone2Map use more than 32gb of ram?

    Hi all,   Had a quick question in regards to ram usage for Drone2Map. I'm currently processing a fairly large project (7000-8000 pictures) on our imagery system (i9-9900k, 32gb of ram) and ram usage is almo...
    carboncountygis
    last modified by carboncountygis
  • Missing DSM & Ortho + Point cloud at wrong elevation

    Hi Guys,   I'm having a problem with the products of my D2M project. First of all, when running the project it does not create a DSM or Ortho even though I have selected them in the processing options.. I have t...
    larselmkaer
    last modified by larselmkaer
  • Using drone video imagery online, animating...

    Hi, my company has a drone (DJI Phantom). We take video flybys with it. We use Pix4D Mapper for doing whatever with image processing and such. (I don't use the drone or software so my knowledge is limited on that enti...
    MidnightYell2003
    created by MidnightYell2003
  • How Does One Choose A Drone Camera For ArcGIS?

    We would like to move forward with our drone technology but because we were burned trying to post-process drone images collected with a DJI Phantom IV and found that the camera was not compatible with ArcGIS Pro we ar...
    MarkHotz
    last modified by MarkHotz
  • Enable Rolling Shutter Correction?

    Where is the option to enable correction for rolling shutter in Drone2Map 2.0.1? There is mention of an "Image Properties Window" in some online documentation (Image properties—Drone2Map for ArcGIS Help | ArcGI...
    jtotton_canfor
    last modified by jtotton_canfor